Battery Chargers - Tenergy 24V 5A LiFePO4 Battery Charger

Replacement Rechargeable Battery and Charger Store - Item #: 481036618 - Battery Chargers

Tenergy 24V 5A LiFePO4 Battery Charger - Features Intelligent charger designed for 8 cell LiFePO4 battery packs. Built-in cooling fan to ensure charger long service life. Safety protection Over Voltage Protection Short Circuit Protection Output Reverse Protection. Charging time: Charging Time= (1.41 * Ah rate of the pack) / 5A charge current. Built-in IC to cut-off power automatically when battery is fully charged. LED indicators LED 1 = Red = Power OnLED 2 = Red = Charging LED 3 = Green = Fully Charged. User Instructions: Check the output plug of this charger and make sure it is not loose. Before charging, please connect the charger's alligator clips to battery first the ''red'' clip connects to the POSITIVE pole and the ''black'' connects to the NEGATIVE pole. After, connect the input power plug to the indoor power supply. The charger applies the intelligent charging method of constant current and constant voltage. The charger will automatically shut off when battery is fully charged. Unplug the input power supply then disconnect the output clips. When charger is not in use or finished charging, be sure to unplug input power supply. Indicator LED instruction ''Charging'' indicator shows ''red'' under normal charging state. It turns into ''Green'' when the battery is fully charged, the battery can be put into use at this time. The charging voltage of this charger is 12V, and shut-off current is 1A. It can only be operated when connect with not fully charged battery. Includes Battery Charger Power Cable Manual Technical Specifications: Item 24V 5A Charger Model TN2405JL Max Output Power 240W Output Voltage 24V ??0.02Vdc Output Current 5A Rated Input Voltage AC90-135V Input Voltage Range 89132Vac AC Input Voltage Frequency 5060 Hz Constant Current 5A??0.5A Constant Voltage 29.2V??0.2V Cut-off Current 0.5A Power Efficiency 90% (Vin=110Vac, rated load) Over Voltage Protection YES Software Over Voltage Protection The charger software limits the maximum output voltage to a level suitable for the connected battery system Thermal Protection N/A Current Limiting Protection YES (At CC Mode) Reverse Polarity Protection When output wires are reversely connected to the battery the charger will not operate and will work normally when DC wires are correctly connected Electric Strength Test Input-Output 1500Vac/10mA/1 min (No Breakdown) Isolation Resistance Input-ground 10m at 500Vdc Isolation Resistance Output-ground 10m at 500Vdc Leakage Current less than 3.5mA Safety CE/UL Compliant High Temperature Ambient Operating +40 degrees C Low Temperature -10 degrees C High Temperature Storage +70 degrees C (Normal after recovery under normal temperature for 2 hours) Low Temperature Storage +40 degrees C (Normal after recovery under normal temperature for 2 hours) Random Vibration 20Hz to 2000Hz 3 Grms 20 hours per axis Repetitive Shock 40g peak 3 orthogonal axes, 3+ and 3- in each axis, 11ms pulse width Thermal Shock -35 degrees C to 75 degrees C, less than 3min transition, 2.5 hours dwell, 200 cycle Drop Test BS EN60068-2-32: 1993 TESTED free fall appendix B AC Wire Length 1.5 m length DC Wire Length 1.5 m length Net Weight 1.0Kg Dimensions 170mmX90mmX50mm (L*W*H) Output Connector Type XLR Connector Casing Aluminum The charger has been calibrated to take account of the voltage drop in the DC output cables during operation, to prevent the possibility of over or under charging of the battery it is recommended the DC output cables are connected directly to the battery without modification. Warning Only for use with LiFePO4 4 cell battery pack (If used with battery pack of less cells will cause damage to battery and possible personal injury may occur). Unplug charger after use. To prevent electrical shock, DO NOT remove casing Be careful of high-voltage inside charger. If failure happens, please contact us. Users and non-professional technicians are prohibited to open the charger! Keep charger out of children's reach. The charger and battery belongs in indoor environment with good ventilation and good cooling system, Do not expose to humid, high temperature, flammable, explosive gas environments. Do not bring charger along during transportation to prevent shock damage! Read the instructions carefully before using. Damage caused by improper use is not covered by warranty.